Find answers, ask questions, and connect with other fishing enthusiasts.

Forums Forums Percy Priest Lake Clean / wax your boat?

  • Clean / wax your boat?

    Posted by Greg on July 10, 2015 at 12:05 pm

    I have failed to wipe down the outside of my boat after being one the lake and that lake scum has really taken hold.
    Is there a better way or product that I should try to make my boat look good?

    krogers79 replied 9 years ago 7 Members · 7 Replies
  • 7 Replies
  • Brian

    Administrator
    July 10, 2015 at 12:13 pm

    Might seem crazy, but I use Lime Away on the outside to get the hard stuff off and then use Dry or Wet Turtle Wax with a dry cloth. Works great for me!

  • halfbass

    Member
    July 10, 2015 at 1:33 pm

    If it’s bad…buy Oxalic Acid in power form…mix as directed…using a rag wipe down area and then flush with water.

    I purchases mine from Amazon in a 2lb bag…only needed 1/4th or 8ozs to clean a 20 ft bass boat.

    WARNING! Wear long sleeve shirt and long pants, rubber gloves and eye protection. It will not burn your skin but they say to try and keep it off your skin and eyes.

    Jim

  • chawchaw

    Member
    July 10, 2015 at 10:41 pm

    hull cleaner from bass pro. it smells bad and wear gloves but it gets all that brown line stuff off my alumacraft. gotta let it sit for 3 minutes then wash

  • Abe

    Member
    July 11, 2015 at 12:43 am

    I agree with Brian, Lime Away works good and it is cheap.

  • mmfisherman

    Member
    July 11, 2015 at 12:40 pm

    +1 on the oxalic acid, works great!

  • Dakota

    Member
    July 11, 2015 at 4:44 pm

    Every since a dry storage boat employee told me to use the works toilet bowl cleaner to get rid off that dark stain from scum that’s all I’ve used, It works instantly. Just rinse off with water. I use a 3m boat wax.

  • krogers79

    Member
    July 14, 2015 at 4:26 pm

    Like Dakota I use the Works toilet bowl cleaner from WM. That stuff is the bomb on my white hull. Make sure you wax afterwards because that stuff goes straight to the gel.

Log in to reply.

s2Member®